Keysight / Agilent N9915A 30 kHz to 9 GHz FieldFox RF and Microwave Combination Analyzer with Options 112/030/010/330/ 312/310/309/308/307/302/238/236/235/233/211/210 Installed - Fresh Calibration Included!
You are bidding on a Keysight / Agilent N9915A 30 kHz - 9 GHz FieldFox RF and Microwave Combination Analyzer with options 112/030/010/330/ 312/310/309/308/307/302/238/236/235/233/211/210 installed. This unit is absolutely loaded and functions perfectly. It will arrive with a fresh calibration and the accessories and softcase shown in the pictures below. The current list price for the N9915A Analyzer with this option configuration is $58,470 USD!
FieldFox is equipped to handle routine maintenance, in-depth troubleshooting and anything in between. FieldFox delivers Keysight-quality measurements wherever you need to go. Add FieldFox to your kit, and carry precision with you.
The microwave combination analyzer's base function is a cable and antenna analyzer. It can be configured with the following optional capabilities: spectrum analyzer, network analyzer, power meter, vector voltmeter, interference analyzer, variable DC source, built-in GPS receiver and remote control using an iPad or iPhone.
Installed Options:
N9915A Base Combination Analyzer - ($18,585)
010 - Vector Network Analyzer Time Domain ($5024)
030 - Remote Control Capability ($671)
112 - QuickCal ($1974)
210 - Vector Network Analyzer Transmission/Reflection ($3993)
211 - Vector Network Analyzer Full 2-port S-parameters ($3993)
233 - Spectrum Analyzer ($9227)
235 - Pre-Amplifier ($985)
236 - Interference Analyzer and Spectrogram ($2237)
238 - Spectrum Analyzer Time Gating ($1134)
302 - USB Power Sensor Support ($657)
307 - GPS Receiver ($657)
308 - Vector Voltmeter ($2144)
309 - DC Bias Variable-Voltage Source ($657)
310 - Built-in Power Meter ($2633)
312 - Channel Scanner ($2299)
330 - Pulse Measurements ($1600)
Features:
Key features of Keysight's FieldFox handheld RF analyzer, include:
- Integrated QuickCal eliminates the need to carry a calibration kit into the field, simplifying cable and antenna test and providing worry-free accuracy and repeatability with every measurement.
- Immediate calibration with FieldFox's CalReady makes the unit calibration ready at the cable and antenna test port immediately following power-up or preset.
- A task-driven user interface derived directly from standard field test procedures guides performance tasks naturally and easily.
- Unmatched sweep speed reduces time-to-problem resolution with test times more than 50 percent faster than traditional RF handheld instruments.
- Fast fault location with 1001-point resolution and 96-dB dynamic range in the spectrum analysis mode.
- Versatile field usability with its lightweight (6.2 lbs.), transflective display, backlit keys, simple data transfer and modern connectivity. The water-resistant chassis withstands wide temperature ranges and humid environments, meeting tough environmental standards (MIL-PRF-28800F).
Cable and Antenna Analyzer (CAT), Vector Network Analyzer (VNA, optional)
- 30 kHz to 9 GHz
- Dynamic range: 100 dB
- CAT: Distance-to-fault, return loss, cable loss
- VNA (optional): S11, S21, S22, S12, magnitude and phase
Spectrum Analyzer (optional)
- 5 kHz to 9 GHz
- ± 0.5 dB amplitude accuracy, full band, over full temperature range of -10 to +55°C (14 to 131°F)
- Spur-free dynamic range: ≥ 105 dB
- Full-band tracking generator
Description:
- Carry the world’s most integrated handheld µW analyzer: standard model includes cable and antenna analyzer
- Expand capabilities with optional VNA, spectrum analyzer, built-in power meter, vector voltmeter, and more
- Save time by measuring DTF and TDR in the same sweep
- Simultaneously measure all four S-parameters
- Make accurate spectrum analyzer measurements (± 0.5 dB) without needing warm-up
- Calibrate simply with QuickCal
- Lightest all-in-one analyzer at only 6.6 lb. (3.0 kg)
| Maximum Frequency |
9 GHz |
| CAT/VNA Start Frequency |
30 kHz |
| SA Start Frequency |
5 kHz |
| Dynamic Range |
91 dB |
| Output Power |
-2 dBm |
| Trace Noise |
0.004 dBrms |
| Number of Built-In Ports |
2 ports |
| Best Speed at 201 Point, 1 Sweep |
210 ms |
| Instrument Type |
Combination Analyzer |
| Cable and Antenna Analyzer |
Yes |
| Spectrum Analyzer |
Yes |
| Vector Network Analyzer |
Yes |
| Applications |
- S-Parameters
- Distance-To-Fault
- Cable Trimming
- Return Loss
- Insertion Loss/Gain
- Interference Analysis
- Power Measurements
|
| Components |
- Cables
- Antennas
- Amplifiers
- Filters
- 75 Ohm CATV Devices
|
| Additional CAT/VNA Based Features |
- QuickCal (Subset)
- Vector Voltmeter
- Mixed-Mode S-Parameters
- TDR Cable Measurements
|
| Additional SA Based Features |
- Built-In Power Meter
- Extended Range Transmission Analysis (ERTA)
|
| System Features |
- GPS Receiver - External Only
- Built-In DC Source
|
| Standard Attenuator Range |
30 dB |
| Standard Attenuator Step |
5 dB |
| Maximum Dynamic Range 3rd Order @1 GHz |
n/a |
| DANL @1 GHz |
-155 dBm |
| Maximum Analysis Bandwidth |
n/a |
| Phase Noise @1 GHz (1 MHz offset) |
-113 dBc/Hz |
| Phase Noise @1 GHz (10 kHz offset) |
-111 dBc/Hz |
| Phase Noise @1 GHz (30 kHz offset) |
-110 dBc/Hz |
| TOI @1 GHz (3rd Order Intercept) |
+15 dBm |
| Applications Available |
Yes |
| Frequency |
5 kHz to 9 GHz |
| Overall Amplitude Accuracy |
±0.5 dB |
| Bandwidth Options |
5 MHz |
| Frequency Options |
9 GHz |
| Performance Level |
?????? |
| Applications-Cellular |
n/a |
| Applications-Digital Video |
n/a |
| Applications-General Purpose |
- AM/FM Tune and Listen
- Cable and Antenna Analysis
- Field Strength Measurement
- SCPI Code Compatibility
- Spectrogram
- Stimulus Response
|
| Applications-Wireless Connectivity |
n/a |
| Handheld |
Yes |
This unit is in excellent condition, has been fully tested and is guaranteed functional. It comes with a 30 day right of return should it not perform to your expectations. Please review pics and text carefully before bidding to verify accuracy of description. If you don't see it in the pictures, it is not included.
Insurance is included in UPS shipping charges. Item shipped internationally on buyer's UPS, FEDEX or DHL accounts only.
We will accept payment for this item by company check, cashier’s check and wire transfer only.
If you have zero feedback, contact us prior to purchase so we know you are a serious bidder. Otherwise, we may cancel your bid before the auction closes. It should be obvious that you should only bid if you are serious and do intend to complete the transaction. Any stated warranty will be voided if the unit is opened or if any calibration or lockout stickers have been tampered with or removed.
Please note that shipping and insurance costs are non-refundable.
Our feedback is very important to us and we strive for 100% positive on every transaction. If you are unsatisfied with any aspect of your transaction, please contact us before leaving negative or neutral feedback so that we can address and remedy the issue immediately. Additionally, we are always happy to leave positive feedback for our trading partners after a successful transaction.
Make sure that you check out our other auctions for more great deals on test and measurement equipment.
Thank you and good luck bidding
Need your unit calibrated by an ISO 17025 accredited lab prior to shipment? Not a problem. We work with numerous calibration and repair companies that can provide your required service at competitive prices.